Reversible Fall Placemat Tutorial - Part 5

The pumpkin sides of each of these placemats are going to be different. The pumpkin in part 5 was made using the 10" half hexi template. These 2 are made with the 5" half hexi template. Go ahead and make 2 exactly the same way you made the 10 inch one in part 4. I used a 1 1/4 inch strip between the hexis to make the pumpkins.

Since we have to put the Appliqué stems on, you need at least 1 1/2 inches between the pumpkins, so I added a strip 2" wide. Then I measured what I had and what I needed to make it the height of the already sewn back. I needed a 2 1/2" strip on the top and bottom. 

I wanted the 2 pumpkins to be at least 3" from the right side, so I cut a strip 3 1/4" by the height (14 7/8") and sewed it on. 

That left 11 1/2 inches to be the same width as the back, so I cut a strip 11 3/4" by 14 7/8". 

I sewed, ironed, and added the 2 stems using the method in my Easy Appliqué tutorial. I still have to sew around the edges. 

2 more placemats to go! One will have 3 small pumpkins across the middle, and the other will have 2 small pumpkins on the left side and a 10" pumpkin on the right side. At least that's the plan now! That's tomorrow's sewing.

Happy Friday!



Comments

Popular posts from this blog

Fish ‘n’ Brewis

Partridgeberry Scones

Copycat Mary Brown's Chicken Wings in the Actifryer